實驗topo
R1配置:
interface GigabitEthernet0/0/0
ip address 192.168.1.253 24
vrrp vrid 1 virtual-ip 192.168.1.254
vrrp vrid 1 priority 120
vrrp vrid 1 preempt-mode timer delay 20
R2:配置
interface GigabitEthernet0/0/0
ip address 192.168.1.252 24
vrrp vrid 1 virtual-ip 192.168.1.254
注意:vrrp vrid 1 preempt-mode timer delay 20命令是配置VRID 1的 搶占延遲時間為20s,如此一來,若Master設備R1在從故障恢 復后,重新切換為Master狀態時需等待20s。
查看VRPP的詳細配置信息:
vrrp簡要信息查詢:
下期講VRRP+MSTP經典組網案例